Help with HMI

User avatar
zorro_66
Posts: 23
Joined: Mon Aug 08, 2016 10:15 am

Help with HMI

Postby zorro_66 » Mon Aug 08, 2016 10:24 am

Hello
My first post here as new Unipi owner

How should I do to change this value from my HMI
Mervis.jpg
tomas_hora
Site Admin
Posts: 298
Joined: Wed Oct 29, 2014 9:56 am

Re: Help with HMI

Postby tomas_hora » Mon Aug 08, 2016 3:20 pm

Hello,

you need to create a new variable and connect to the IN. Then you build the project, update the list of variables in the HMI and you will see the variable in the HMI variables manager.
User avatar
zorro_66
Posts: 23
Joined: Mon Aug 08, 2016 10:15 am

Re: Help with HMI

Postby zorro_66 » Tue Aug 09, 2016 10:27 am

Is there a manual on how to create a new variable :oops: :oops: :oops: :oops:
tomas_hora
Site Admin
Posts: 298
Joined: Wed Oct 29, 2014 9:56 am

Re: Help with HMI

Postby tomas_hora » Tue Aug 09, 2016 1:18 pm

If you are using the IDE in simple mode, than just right click on the left side of the Fupla editor and choose add new global variable.
If you are in a full mode than you can also do that using the ST code in the mixed variables.
User avatar
zorro_66
Posts: 23
Joined: Mon Aug 08, 2016 10:15 am

Re: Help with HMI

Postby zorro_66 » Wed Aug 10, 2016 6:59 pm

Well I found where I created a new variable
but I can not figure out how to do this, what I write in the box.
Sorry for the stupid questions but are completely new to this.. :mrgreen: :mrgreen:
tomas_hora
Site Admin
Posts: 298
Joined: Wed Oct 29, 2014 9:56 am

Re: Help with HMI

Postby tomas_hora » Thu Aug 11, 2016 9:17 am

check the Visible box at the in2 in the gt function block. Than you can connect the new variable to the to function block.

Its OK, at least we know we need to do more detailed vido tutorials :)
User avatar
zorro_66
Posts: 23
Joined: Mon Aug 08, 2016 10:15 am

Re: Help with HMI

Postby zorro_66 » Sun Aug 14, 2016 10:36 am

Have got it working now thanks for the help :mrgreen: :mrgreen:

Return to “Mervis”

Who is online

Users browsing this forum: No registered users and 0 guests