Flow meter

egyed@mobila.hu
Posts: 1
Joined: Sat May 28, 2016 10:35 am

Flow meter

Postby egyed@mobila.hu » Sat May 28, 2016 10:42 am

I used a flow meter (https://www.adafruit.com/products/833) with RPi (the red wire to +5V, the black wire to common ground and the yellow sensor wire to pin #2.) It worked well.

How could I use it with UNIPi?
tomas_hora
Site Admin
Posts: 298
Joined: Wed Oct 29, 2014 9:56 am

Re: Flow meter

Postby tomas_hora » Mon May 30, 2016 8:19 am

Almost the same way. See this example: http://unipi.technology/wiki/Reading_si ... of_devices

You can choose whether your flow meter will use 5 or 12V for the signal
User avatar
zorro_66
Posts: 23
Joined: Mon Aug 08, 2016 10:15 am

Re: Flow meter

Postby zorro_66 » Sun Aug 14, 2016 10:39 am

How did you get this flow meter to work with unipi :oops: :oops:

Return to “Other Peripherals”

Who is online

Users browsing this forum: No registered users and 0 guests