Analog out connection

Post Reply
User avatar
zorro_66
Posts: 23
Joined: Mon Aug 08, 2016 10:15 am

Analog out connection

Postby zorro_66 » Thu Sep 15, 2016 10:21 am

Have I got the guide right as shown below :oops: :oops:
Analog4.jpg
Top
tomas_hora
Site Admin
Posts: 298
Joined: Wed Oct 29, 2014 9:56 am

Re: Analog out connection

Postby tomas_hora » Thu Sep 15, 2016 3:24 pm

If you want to use external power supply, you do not need to make connection to the AI- and definitely not to 12V!

Just connect the positive pole to AOV, negative to AOG.

By the way, minimum voltage on the AOV is 12V in order to be able to get 10V on the AO.
Top
User avatar
zorro_66
Posts: 23
Joined: Mon Aug 08, 2016 10:15 am

Re: Analog out connection

Postby zorro_66 » Fri Sep 16, 2016 1:40 pm

Ok I connect like this when I should use power from Unipi
Analog1.jpg


and I connect like this when I use an external power supply
Analog11.jpg
Top
tomas_hora
Site Admin
Posts: 298
Joined: Wed Oct 29, 2014 9:56 am

Re: Analog out connection

Postby tomas_hora » Sat Sep 17, 2016 12:28 pm

Right :)
Top
User avatar
zorro_66
Posts: 23
Joined: Mon Aug 08, 2016 10:15 am

Re: Analog out connection

Postby zorro_66 » Mon Sep 19, 2016 12:05 pm

ok tanks :mrgreen: :mrgreen:
Top
Post Reply

Return to “Mervis”

Who is online

Users browsing this forum: No registered users and 1 guest