Digital input 2 stays closed

Post Reply
tvleminc
Posts: 3
Joined: Tue Mar 15, 2016 5:16 pm

Digital input 2 stays closed

Postby tvleminc » Wed Mar 16, 2016 9:20 pm

Hello,

My digital input 2 stays in state closed, nothing connected. This is a new raspberry Pi and Unipi.

Any idea ?
Top
tomas_hora
Site Admin
Posts: 298
Joined: Wed Oct 29, 2014 9:56 am

Re: Digital input 2 stays closed

Postby tomas_hora » Thu Mar 17, 2016 9:08 am

Did you read viewtopic.php?f=14&t=57 ?
Top
tvleminc
Posts: 3
Joined: Tue Mar 15, 2016 5:16 pm

Re: Digital input 2 stays closed

Postby tvleminc » Thu Mar 17, 2016 4:31 pm

Yes,

But GPIO11 stays on OUT.
Attachments
tvleminc_—_pi_raspberrypi____—_ssh_pi_192_168_1_6_—_133×28.png
Top
tomas_hora
Site Admin
Posts: 298
Joined: Wed Oct 29, 2014 9:56 am

Re: Digital input 2 stays closed

Postby tomas_hora » Thu Mar 17, 2016 6:55 pm

Then you most probably have another software causing this GPIO to set as output..
Top
tvleminc
Posts: 3
Joined: Tue Mar 15, 2016 5:16 pm

Re: Digital input 2 stays closed

Postby tvleminc » Thu Mar 17, 2016 8:04 pm

You are right, pilight was still running ! :) Thank you
Top
Post Reply

Return to “UniPi HW Q&A”

Who is online

Users browsing this forum: No registered users and 1 guest