Domoticz

BlackSoll
Posts: 31
Joined: Sat Jul 04, 2015 9:07 am

Domoticz

Postby BlackSoll » Sat Jul 11, 2015 11:38 am

Really interesting light weight application.

https://www.domoticz.com/

Can someone help me make a plugin for unipi ? Tried but always dead end.Can't make unipi to work with it :(

Sould i try with this or i might fry the unipi ?

Consequently, the GPIO pins you want to use must be "exported" and configured (using the "gpio" tool included in wiringPi) before starting domoticz (that should normally be done in a script upon boot, before domoticz starts)


http://www.domoticz.com/forum/viewtopic ... 19&p=15225
tomas_hora
Site Admin
Posts: 298
Joined: Wed Oct 29, 2014 9:56 am

Re: Domoticz

Postby tomas_hora » Mon Jul 13, 2015 1:40 pm

Looks interresting but you would need much more than the GPIOs to make UniPi to work with domoticz.

However UniPi is fully supported in fhem.de ( see our shop for iso) and we are also planning supoort for pimatic which might also suit you.
tomas_hora
Site Admin
Posts: 298
Joined: Wed Oct 29, 2014 9:56 am

Re: Domoticz

Postby tomas_hora » Tue Jul 21, 2015 12:33 pm

By the way, maybe it would be easier to implement the plugin using the websocket API of Evok... What do you think?
BlackSoll
Posts: 31
Joined: Sat Jul 04, 2015 9:07 am

Re: Domoticz

Postby BlackSoll » Tue Jul 21, 2015 3:57 pm

I'm working with a lua script, which is using evok, to make thinks work. The first part with the relay automation i think is finished with a big help from another member.
The analong inputs - outputs, the one wire sensors e.t.c......not working....Looking for solution ....

Maybe i can sent you the script to have a look when you have time. I can't attach file here so you can pm me your email to sent it to you.

Lua is integrated in Domoticz and with a script there is no need for plugin.
https://www.domoticz.com/wiki/Domoticz_ ... ua_scripts


Thanks !
BlackSoll
Posts: 31
Joined: Sat Jul 04, 2015 9:07 am

Re: Domoticz

Postby BlackSoll » Wed Aug 05, 2015 12:55 pm

Hi Tomas !
I'm wondering if you take a look at the script and if you have any solution for the 1wire temp sencors.
BlackSoll
Posts: 31
Joined: Sat Jul 04, 2015 9:07 am

Re: Domoticz

Postby BlackSoll » Fri Aug 14, 2015 8:19 am

Still looking ways to make thinkgs work....... :?
Domoticz have built in support of node-red and node.js.
https://www.domoticz.com/wiki/MQTT
https://www.domoticz.com/wiki/Flows

Is this an alternative way, with creating little programs (flows), to interface UniPi with domoticz ?
I'm not a programmer and don't really know much...Just basic knowledge of how thinks work, so forgive me if i ask to much...
tomas_hora
Site Admin
Posts: 298
Joined: Wed Oct 29, 2014 9:56 am

Re: Domoticz

Postby tomas_hora » Fri Aug 14, 2015 10:20 am

I would really like to help you out with the domoticz implementation but I still do not have enough time for that... But domoticz is a really interresting project which I think should have a full support for UniPi.

Return to “General discussion”

Who is online

Users browsing this forum: No registered users and 1 guest